What OSHA Compliance Services Actually Cover for Occupational Health Testing
October 22, 2024 · 4 min read
By Jeff Schroeder, Foster Special Instruments
What do OSHA compliance services actually cover for occupational health testing?
For employers running occupational health testing programs, OSHA compliance services mean something narrower than generic safety consulting. The core obligations are the hearing conservation program under 29 CFR 1910.95, respirator medical evaluation and fit testing under 1910.134, and the injury and illness recordkeeping rules under 1904. Each of these ties specific tests, specific intervals, and specific records to specific employees, and the compliance work is tracking those deadlines and producing the documentation when an inspector or an auditor asks for it. A company that treats "OSHA compliance" as one generic line item misses that these are separate regulatory clocks running on separate employees at the same time.
Which OSHA standards actually drive an occupational health testing program?
Three standards do most of the work. 1910.95 requires audiometric testing and a hearing conservation program for employees exposed to noise at or above an 8-hour time-weighted average of 85 decibels, including baseline and annual audiograms. 1910.134(e)(1) requires a medical evaluation before an employee is fit tested or required to use a respirator, with additional evaluations when the triggers in 1910.134(e)(7) occur, and 1910.134(f)(2) requires annual fit testing for tight-fitting respirators. Part 1904 sets the separate requirement to record work-related injuries and illnesses meeting specific criteria on the OSHA 300 log, keep those records for five years under 1904.33, and post the 300A summary annually under 1904.32. None of these three standards overlaps cleanly with the others, which is why a single "OSHA compliance service" line item usually hides three different tracking problems.
| Standard | Who it covers | Core testing requirement |
|---|---|---|
| 29 CFR 1910.95 | Employees at 85 dB TWA or above | Baseline and annual audiometric testing |
| 29 CFR 1910.134 | Employees required to wear a respirator | Medical evaluation before fit testing; annual fit test for tight-fitting respirators |
| 29 CFR 1904 | All covered employers | OSHA 300 log entries, 5-year retention, annual 300A posting |
What records does an OSHA compliance program actually need to produce?
An inspector or auditor is not asking whether a company has a safety policy. They are asking for specific documents tied to specific employees and dates: the audiogram showing an employee's baseline and most recent annual test, the respirator medical evaluation on file before that employee was fit tested, and the OSHA 300 log entry if an injury met the recording criteria. Programs that keep these as scattered PDFs or spreadsheet rows per employee tend to produce incomplete answers when asked for all three at once, because each record lives in a different tracking system maintained by a different person.
What happens when a required record can't be produced?
A missing baseline audiogram, a missing respirator medical evaluation, or a 300 log entry that was never created are each independently citable, and they are usually discovered together during an inspection rather than one at a time. The exposure compounds because a missing baseline makes it impossible to determine later whether an employee's hearing has shifted under 1910.95's standard threshold shift criteria, which affects both that employee's case and the defensibility of the whole hearing conservation program.
How Foster handles OSHA compliance tracking for occupational health testing
For employers tracking testing deadlines across multiple standards and multiple employees, Foster's Compliance Workspace builds an employee-by-requirement matrix with the applicable CFR citation, the evidence record, and an exportable audit PDF or CSV, so the question "can we produce this record right now" has an answer before an inspector asks it.
For the hearing conservation side specifically, see Foster's post on what OSHA actually checks during a hearing conservation audit.
FAQ
Is OSHA compliance one requirement or several?
Several. Hearing conservation under 1910.95, respirator medical evaluation and fit testing under 1910.134, and injury/illness recordkeeping under Part 1904 are three separate standards with separate employee populations, separate test intervals, and separate required records.
How long must OSHA 300 log records be kept?
Five years following the end of the calendar year the records cover, under 29 CFR 1904.33. The 300A annual summary must also be posted at the worksite from February 1 through April 30 of the following year, per 29 CFR 1904.32.
Does every employee need a hearing conservation baseline test?
Only employees exposed to noise at or above an 8-hour time-weighted average of 85 decibels, per 29 CFR 1910.95. Employers must identify which employees meet that exposure threshold before determining who needs baseline and annual testing.
What triggers the respirator medical evaluation requirement?
Any employee required to wear a respirator must have a medical evaluation completed before being fit tested or required to use the respirator on the job, under 29 CFR 1910.134, with annual fit testing required for tight-fitting respirators.
What's the fastest way to check if our compliance records are audit-ready?
Pull the specific record for each standard, the most recent audiogram, the respirator medical evaluation date, and the current OSHA 300 log, for a sample of employees and confirm each is current and complete. A gap in any one of the three is as citable as a gap in all three.
Sources
- 29 CFR 1910.95 - Occupational noise exposure (Cornell Legal Information Institute, e-CFR)
- 29 CFR 1910.134 - Respiratory protection (Cornell Legal Information Institute, e-CFR)
- 29 CFR 1904.33 - Retention and updating (Cornell Legal Information Institute, e-CFR)
- 29 CFR 1904.32 - Annual summary (Cornell Legal Information Institute, e-CFR)
Get a price for your program
Foster runs occupational health compliance programs end to end: testing, calibration, training, and records.
Related guides
Employee Job Transfers: Which OSHA and DOT Clocks Start When a Role Changes
An internal transfer can start a baseline audiogram, a fit test, or DOT testing duties. A checklist for what changes when an employee moves to a new role.
6 min read Read →OSHA ComplianceMulti-State Employers: Do OSHA and DOT Compliance Deadlines Vary by State?
OSHA state plans can add to federal rules, while DOT testing rules preempt conflicting state law. How multi-state employers should track deadlines per site.
6 min read Read →OSHA ComplianceSpreadsheet vs. Software for Tracking OSHA and DOT Compliance Deadlines
A spreadsheet works until the first audit or the first missed renewal. What breaks when employee count grows, and when it is worth moving off a spreadsheet.
5 min read Read →